Envirotex is the latest reactive polymer compound that delivers reliability and a superior finish that has been developed to last against the harshest elements. It requires a temperature of 70 degrees in order to completely cure into a high gloss over a period of 8 hours. Envirotex Lite – Pour On High Gloss Finish is a unique product that allows for the creation of a deep and beautiful surface layer.
The use of Envirotex is becoming increasingly popular and can be purchased in a 16 ounce or 32 ounce product for all resurfacing requirements. It is considered a valuable and affordable solution in comparison to having to hire a contractor to achieve the same results. It requires a 48 hour period to cure completely and develop a tough exterior that will not have to be polished as it delivers a naturally shiny exterior.
There are many different surfaces and objects that can be painted including rocks, fabrics, flowers, dough, paper, and wood among others. If you are going to implement more than a single layer, it is important that a clean cloth and rubbing alcohol are used for the preparation. These solutions are waterproof once cured and can serve to protect against the destruction caused by environmental elements.
When preparing the solution it is important to mix the resin and hardener together in a container with a smooth, flat bottom and walls. Be sure to scrape the sides and the bottom of the container while mixing to prevent against the formation of clumps. If the necessary mixing directions are not followed, the solution will form a soft and sticky texture.
There are safety instructions that must be adhered to including the option to wear goggles and rubber gloves. If a surface area is coated with polyurethane or similar products it must be sanded and cleaned with rubbing alcohol. These areas must not be covered in wax or contaminants and requires additional solution to spread over the object.
The consistency of resin and hardener will have to be measures accordingly. These types of solutions must be prepared in a step by step manner to ensure that it will not cure before it has been applied. A stiff piece of paper and blow torch can be applied to eliminate the presence of bubbles and similar effects.
To cure the product, maintain a room temperature of between 70 and 80 degrees Fahrenheit. The higher the temperature and controlling dust will allow for faster drying times including the delivery of a glossy surface. Considerations should be made for tooling and procedure that will produce an attractive result.
Get a brief summary of Envirotex Lite by checking out our products online. Complete details and information about clear resin is just a click away!